Aque-Eye Kit
  • Aque-Eye Kit
  • Aque-Eye RX2
  • Aque-Eye RX2
  • Aque-Eye RX2 Receiver
  • Aque-Eye Transmitter
  • Aque-Eye Solar Regulator
  • Aque-Eye Solar Panel
  • Aque-Eye Program Lead
  • Aque-Eye Battery
  • Aque-Eye Antenna Cable
  • Aque-Eye Antenna Bracket
  • Aque-Eye Antenna

AERX2KIT-1M - Aqua-Eye Wireless Tank Level Control System Code: 70162

The AERX2KIT-1M kit is supplied with 2 x 1 metre whip antenna suitable for direct line of site transmission of up to 3KM or limited obstacles (trees not landmass) up to 1KM.

The Aqua-Eye Wireless Liquid Level Management system enables remote monitoring of tank level providing on/off control of pumping systems. The Aqua-Eye is not limited to pump control and can be used to monitor levels of almost any type of water storage container or area such as ponds, troughs, sumps etc.

The Aqua-Eye connects to any standard tank level float switch with N/O (normally open) and N/C (normally closed) contacts. The state of the float switch is transmitted to the receiver unit every 62 seconds. Transmission range is up to 3KM direct line of sight (tested in an open field area) and further distances may be obtained with the use of larger antenna.

The RX2 receiver has din rail mounting, is 230VAC powered and has a 30A 230V rated single poll relay for pump control. The RF receiver wires to the master controller via a 4 core security cable of up to 100M.
Over 4 billion transmission codes are available ensuring you will never get any interference with other wireless systems installed nearby.

The system is supplied as a kit of parts and requires installation into a suitable enclosure at both the tank and pump.

AERX2KIT-1M Kit Contents

1 x GLT271208N 1W Transmitter
2 x ANT271MWHIP 1M Whip Antenna
1 x RX2 Receiver Kit
1 x ANT-SSMT SS Antenna Mount
1 x ANT-4MLEADBASE Antenna Base and Lead
10M x 4 Core 0.44 Security Cable
1 x Solar Panel
1 x Solar Regulator/Battery Connector
1 x SLA Battery 7Ahr
1 x Red Programming Lead
1 x Installation Instructions

NOTE!
Other item required but not supplied in kit.

Suitable float for tank level signals.
Suitable enclosure for transmitter and battery at tank.
Suitable enclosure for receiver master controller.

Warning!
Receiver master controller requires 230VAC supply – a 400V version is not available.

Email to a Friend

Availability: In stock

Excl. Tax: NZ$937.39 Incl. Tax: NZ$1,078.00
View more about this product