• Operates on 240VAC
• Highly sensitive receiver input stage. When used with GLT433… series transmitters there’s an operating range of 350 metres (980 ft) possible.
• Crystal controlled for high stability and performance.
• Uses micro-controller technology that can be re-programmed to suit unique applications.
• Momentary, flip-flop, timed and latching output modes can be selected by the user. Changing the settings on the four-way dipswitch does this.

Applications
• Security, automatic door/gate controllers, timed light control and simple on/off functions

Description
The GIGALINK™ , GLR2701240 is the most advanced Remote Control technology available in the world today. GIGALINK ä is an invention that has revolutionised the entire Remote Control technology including Elsema's earlier version of FMT- … and FMR- … series. The GLR2701240 state-of-the-art invention brings a new dimension in the world of Remote Control technology in domestic, commercial and industrial applications.

The innovative microcontroller technology replaces the traditional dip switch coding which eliminates any possible code grabbing. Special features such as over four billion code combinations, operational over a wide voltage range, eight user selectable modes and ability to program any number of transmitters to a receiver adds up to the most advanced and secure Remote Control available.

Four billion codes
The user can easily change the code on all the channels. Momentary joining the two CC pins on the receiver board sets all channels to one random code. One of 4,294,967,296 possibilities is selected.

Code Programming
In programming mode the receiver sends a random code to program the transmitter channel(s). This is known as reverse programming.

Momentary joining the two CC pins on the receiver board sets the channel to a random code.

Follow the steps outlined in the receivers instruction sheet titled single code programming to complete the code programming.

The receiver power must be connected when code programming.

When programming is completed and the GIGALINK cable is removed from the receiver-coding socket, the 4-way dip switch is used to select different output modes. This is described below.

Different Modes for the Output
Modes are user selectable from the 4-way dip switch, shown below.