Features
• Built-in Channelised Code Programming System
• Can be channelised code programmed without power connected
• Transmitter can be integrated according to your needs

Applications
• Security, industrial machine monitoring, crane control, level monitoring, multiple on/off functions etc.

Description
The GLT2708NC/TEX16 combo transmitter is used with the GLR2708/REX16 to have a 16-channel remote control.

The GLT2708NC/TEX16 microcontroller has a built-in channelised code programming system. Channelised code programming programs all the channels, from the sixteen channel receiver, to the sixteen channel transmitter. That is, channel one on the transmitter activates channel one on the receiver and alternatively. To channelise code program a sixteen channel transmitter read the GLR2708/REX16 receiver setup instructions.

The transmitter can be channelised code programmed without power connected.

Operating Distance
An operating distance (in conjunction with the GLR2708/REX16 receiver) of 350 metres is possible. The operating distance depends upon the receiver antenna and location.


Case
The GLT2708NC/TEX16 is supplied without a case. This allows the transmitter to be integrated according to your needs.

Technical Data
Power Source Battery: 9V Battery (Only applied to battery clip) or
10-16VDC (Only applied to + / - terminals)
Current Consumption Max 50mA at 12VDC supply on terminal (only when transmitting)
Standby Current 10uA (typical)
Transmission Modes Continues: Transmits as long as the channel is activated.
Battery Monitor LED flashes at 1Hz, during transmission, when battery voltage is at 6.5V (flat 9V battery) or terminal connection is at 9.0V
Operating Freq 27.195MHz
Carrier Freq Tolerance Crystal controlled 30 parts per million
Operating Temperature Range -5 to 50°C
RF Power Output 76.5dBuV/m at 3m
Antenna Built-in 50mm long dilec rod
Type of Emission Narrow-bandwidth Frequency Modulation (5K00F1D)
Freq Deviation Limiting 1600 - 1900Hz non-return to zero
Modulation Freq 1.8kHz (0.56 ms/bit) (15% tolerance)
Spurious Transmission At least -60dB/carrier
Necessary Bandwidth ±2.5kHz
Digital Coding System Microcontroller based 96-bit word
Code Combination 4,294,967,296
Digital Channels 16 Channels via terminal block with ground connection
Dimension GLT2708NC: 70 x 50 x 14mm
TEX16: 96 x 70 x 14mm
Weight 75g
Useable Receivers GLR2708/REX16
Useable Operating Range Up to 350m, depending on receiver antenna and location.