Features

• 8 Channels
• Wide supply connection – 11.0 to 28.0 Volts AC/DC
• Highly sensitive receiver input stage. When used with GLT27…. series transmitters and an ANT27L antenna, an operating range of 350 metres (980 ft) is possible.
• Eight open collector (GLR2708). All outputs can be operated simultaneously.
• Crystal controlled for high stability and performance.
• Dual Conversion to reduce interference.
• Uses micro-controller technology that can be re-programmed to suit unique applications.
• Momentary, flip-flop and latching output modes is user selectable.

Applications

• automatic gates, security, timer controlled outputs and simple on/off functions etc

The GIGALINK™ is an advanced Remote Control technology available in the world today. GIGALINK™ is an invention that has revolutionised the entire Remote Control technology including Elsema's earlier version of FMT- … and FMR- … series. The GLR.... series state-of-the-art invention brings a new dimension in the world of Remote Control technology in domestic, commercial and industrial applications.

The innovative microcontroller technology replaces the traditional dip switch coding which eliminates any possible code grabbing. Special features such as over four billion code combinations, ability to program any number of transmitters to any of the receiver outputs, three user selectable modes, dual conversion superhet and operational over a wide voltage range all adds up to the most advanced and secure Remote Control available.

The microcontroller built-in code programming system automatically selects the programming mode that provides flexibility in programming each receiver channel to different transmitter channels. In programming mode the receiver sends a random code to program the transmitter channel(s). Momentary joining the two CC pins on the receiver board sets all eight channels to a random code. To program the receiver to the transmitter channel(s) follow the steps outlined in the receiver instructions.

Four billion codes

The user can easily change the code on all the channels. Momentary joining the two CC pins on the receiver board sets all channels to one random code. One of 4,294,967,296 possibilities is selected.