The PHAT8FO has 8 multi-voltage PNP inputs and 8 SMARTFET outputs rated at 1 amp each. There are two positive input voltage terminals labeled 12V and 24V.

Each output can be connected to either 12V or 24V supply by an on board jumper. The 8 inputs control the corresponding 8 outputs. A positive voltage on an input between 5 to 28VDC will turn on the corresponding output.

The PHAT8FO is an ideal relay replacement for driving valves and other low voltage devices. This module is also ideal where you have two different control voltages in a system or for interfacing different systems.

The two supply voltage inputs labeled 12V and 24V can be any voltage between 12 to 28VDC.

The 8 outputs are rated at 1A and are protected for over current.

Supply Inputs: 2 x 12 to 28VDC
Inputs: 8 x 5 to 28VDC
Outputs: 8 x 1A jumper selectable to either supply voltage.

Supplied with both din rail and surface mount end caps.

Dimensions:
With din rail mounting: W75mm x L86mm x H45mm above din rail.
Surface mounting: W99mm x L86mm x H33mm
Height is height above din rail.