This is a small potted relay with a 12VDC coil and NO (normally open) contacts rated at 230VAC 10AMPs resistive (non inductive)

Ideal for lighting control etc where the relay needs to be located behind a light switch in the flush box.

All connection are via flying leads so no 230VAC connections are exposed making it safe when installed in or behind a flush wall box.

Coil - 12VDC
Contact - 230VAC 10AMP Max resistive (non inductive) - not suitable for 230VAC halogen lights or fluorescent lights

Leads - 300mm Long
Red/Black = 12VDC + and -
White = Relay Contact

Size - 37mm x 25mm x 20mm Excluding tabs (which can be cut off)

With Tabs - 55mm x 25mm x 20mm